Skip to content
Newly built empty office with a glass meeting room, a wet vacuum and a cleaning cart, post-construction cleaning

Post-Construction Cleaning for Offices

Post-construction cleaning for office fit-outs and renovations. Loop Office Cleaning removes construction dust and residue from completed workplace interiors, from rough cleaning through final care and touch-ups.

Request a quoteCall (408) 414-6221

Early and interim cleaning

Rough and progress cleaning clear construction dust, paint specks and adhesive left by each stage of the work. On phased projects, each finished area is cleaned as the contractor releases it.

Final cleaning of completed rooms

We clean interior floors and glass, fixtures, and shared workplace surfaces. Meeting rooms and restrooms receive attention alongside the newly finished office areas.

Touch-ups after further trade activity

A touch-up treats new dust or marks left after the final clean. Adhesive and paint spots are removed with a method matched to the surface.

Office suites within an occupied property

We clean renovated office suites and adjoining common areas in occupied buildings. Construction dust and debris are cleared from the finished interiors.

Getting a new office ready to open

The last days before a move-in are usually crowded with furniture deliveries, technicians and final trade visits, and our tenant improvement allowance guide covers whether that cleanup falls to the contractor or to you. Phased cleaning lets finished rooms be cleaned as they are released, and a touch-up after the last trades leave catches the dust and marks that arrive late in the schedule.

Fit-outs for biotechnology offices in South San Francisco and technology suites in Redwood City follow the same sequence. Once the space is in use, janitorial services take over the recurring care. Restrooms renovated with the office are cleaned along with the workplace rooms, so the whole suite is ready at once. Loop’s certificate of insurance goes to the general contractor or building manager ahead of the first clean, so site paperwork never holds up the crew.

How the phases fit a construction schedule

Rough cleaning comes once the heavy work ends, removing construction dust and debris so the space is workable for the finishing trades. Progress cleaning repeats at milestones during the build. The final clean happens once the trades finish, covering floors, glass, fixtures and every surface the new occupants will touch, and a touch-up after the last punch-list visits catches what arrives late.

On larger fit-outs, phased cleaning takes the project one area at a time, so a finished wing can be cleaned and occupied while work continues elsewhere.

Fit-outs in occupied buildings

Renovating one suite in a building that stays open means construction dust reaches the corridor, the elevator lobby and the restrooms other tenants use. Those adjoining common areas are cleaned along with the suite, so the rest of the building is not left carrying the project’s dust.

This is common in San Francisco and San Jose high-rises, where one floor is rebuilt while the rest of the tower works normally, and on corporate campuses, where buildings are refreshed one at a time. Once the suite reopens, office cleaning picks up the daily care.

Information that helps plan the clean

Project cleaning goes smoothly when the schedule is shared early. New carpet that collected dust in the final weeks can receive extraction from commercial carpet cleaning before move-in.

Pricing a post-construction clean for an office fit-out

Post-construction cleaning is a one-time charge per square foot covering every phase, from the rough clean through the final touch-up. Going by 2026 project pricing and published market data, most office projects across the service area fall between $0.29 and $0.70 a square foot, starting around $0.21 for a light refresh in Las Vegas and reaching $1.00 for dusty, phased San Francisco fit-outs.

For a 12,000-square-foot biotechnology office fit-out in South San Francisco with rough, final and touch-up passes, a rate of $0.45 comes to $5,400 for the job. A small suite repaint that needs only a final clean sits far lower per foot, while a phased project where rooms are released one at a time sits higher because the crew returns several times.

Dust load comes first: demolition, sanding and ceiling work leave fine dust on ledges, vents, glass and inside cabinets, and each layer adds passes. The number of phases and return trips follows, then the glass count, new restrooms with fixtures to detail, and floors that need their first finish care after the trades leave. Fit-outs inside occupied buildings take longer because the crew works around tenants, and a tight move-in date compresses the schedule. Sharing the drawings and the move-in date at a walkthrough lets the quote reflect the real job.

A few useful answers

Frequently asked questions

How does final cleaning differ from a touch-up?

The final clean details the whole finished space; a touch-up comes back for the dust and marks late trades leave.

Can a project be cleaned one office area at a time?

Yes. Phased cleaning treats completed, accessible portions of the office project.

Do you clean restrooms renovated with the office?

Yes. New restroom fixtures and surfaces are cleaned along with the workplace rooms.

How are residues on a new finish handled?

Paint specks, adhesive and grout haze come off with a method tested on the new finish first, so floors, glass and counters aren’t scratched.

Can recurring office cleaning follow the project clean?

Yes. Office cleaning maintains the workplace after the completed space returns to everyday use.

Can cleaning keep pace with furniture deliveries before move-in?

Yes. Phased cleaning treats rooms as they are finished, and a touch-up afterward handles dust left by later deliveries or trade work.

When should the final clean be booked?

After the trades finish their work and before furniture and people move in, with a touch-up held for anything that arrives afterward.

Can new resilient floors receive a finish after construction?

Yes. Once construction dust is removed, compatible resilient floors receive finish care as part of preparing the space for daily use.

Is the elevator lobby cleaned when only one suite was renovated?

Yes. Adjoining common areas that collected construction dust are cleaned together with the suite.